The Hearst mill is built around a 2000 Siempelkamp eight opening 5 x 24’ press with a capacity of 159 MCM per year. Major Machinery components of the mill include:

PRE-DRYING AND REFINING SYSTEM
• 1999 MEC 12 x 48 triple pass rotary dryer with dual fired burner (dust and gas), with cyclones, airlocks, dust fuel bin, fans and Electrostatic Filter Bed • 1999 PAL DP Screen • Two Champion Hammermills with 300 hp drives • Two Acrowood VIRO Fines screens

DRY SCREENING AND REFINING
• 1999 PAL Screen • Two Hombak WKM face refiners One Hombak core refiner

POLLUTION ABATEMENT EQUIPMENT
• Numerous Ducon, MacDonald Steel bag houses with Rosemount CEMS emissions monitoring system

RESIN SYSTEM
• Two 1998 PAL CGD blenders • Two 1998 PAL continuous scales • 1998 PAL dosing bin? • Berg 1998 50 ton chiller unit with circulating pumps, shell and tube condenser with holding tank • Three 1998 Vechem skid mounted dual configuration liquid additive delivery systems with pumps, flow meters and day tank

PRE-PRESS AND PRESS SYSTEM
• Dieffenbacher pre-press • 2000 Siempelkamp cross cut and edge trim saw • 2000 Siempelkamp 5’ x 24’ 8 opening system (pre engineered for 10 openings) with loader, Rexroth hydraulic, Allwieller thermal oil circulating system, spare loader tray and alignment device • Demets unloading system

BOARD COOLER/SAW SYSTEM
• 2000 Globe 39 positions vertical wicket panel cooler • Globe 13A trim skinner saw • Anthon second pass saw system

SANDING AND SAWING SYSTEM
• Durand adjustable sander feeder • Timesaver 6 head sander • Globe 16A Skinner saw • Globe 13A cut off saw • Durand panel turner • Durand Three bin panel stacker

MISCELLANEOUS EQUIPMENT
• Large number of fans, cyclones, belt, screw, chain and bucket conveyors, Grecon Spark detection system,Grecon line board thickness gauge

Visit the link below for pictures of the mill.

http://http://web.mac.com/dbc4659/iWeb/Site/Home%20Page.html

MILL MACHINERY LLC IS THE EXCLUSIVE AGENT FOR THE SALE OF AINSWORTH’S OSB – LINE ONE LOCATED IN BEMIDJI, MINNESOTA

OSB Line One is built around a Washington Iron Works 22 opening press with 4' X 24' platens. Major machinery components on the line include:

• Nicholson A-5 debarkers • CAE Flakers • Carothers Green and Dry Storage Bins • Coil and ACO Blenders • Leckenby Formers • Washington Iron Works Press Loader and Unloader • Geoenergy E-Tubes

This line includes all mechanical and pneumatic conveying, glue preparation, waste reduction equipment, hydraulic systems and motor control centers. Contact us for additional information on this line.

http://http://web.mac.com/dbc4659/iWeb/Site/Home%20Page.html

FOR PICTURES AND VIDEOS OF THE STIMSON MILL

A PARTIAL LIST OF THE MACHINERY STILL AVAILABLE AT THE BONNER PLYWOOD MILL

• NICHOLSON A-1 DEBARKER
  
• COE 249 8' LATHE LINE WITH TRAY SYSTEM, DURAND CLIPPER, VENTEK SCANNER, DURAND DIVERTER AND DURAND FIVE BIN STACKER
  
• COE 10' LATHE
  
• COLUMBIA 5' X 10' HOT PRESS
  
• VENEER SCARF SYSTEM
  
• TWO GLOBE SAW LINES
  
• SWEED CORE SAW
  
• AUTOMATIC STRAPPING SYSTEMS

CONTACT:

• AL WEBSTER - 503-829-7756 (al@millmachinery.net)
  
• TIM PETERSON - 503-829-3323 (tim@millmachinery.net)
  
• DAVE COWAN - 503-730-4791 (dave@millmachinery.net)

Mill Machinery LLC specializes in selling New, Reconditioned and Used machinery to the forest products industry. MMC can provide individual machines to complete plants. Our inventory encompasses the MDF, OSB, Veneer, LVL, Plywood and Particleboard sectors of the forest products industry. Our staff of trained technicians provides complete reconditioning service on most items in our inventory. Our technician's experience, with an average of 20 years of service, is unsurpassed in the forest products inventory.

For a quote or additional information on any of the machinery in our inventory contact Tim Peterson, Al Webster, John Herkamp or Dave Cowan.